Damp proofing or waterproofing: which do you need?

They sound alike, but they solve different problems. One question tells you which your wall needs.

The short answer

Ask whether the floor inside is lower than the ground outside. If it is, the wall is holding back soil and water and needs waterproofing designed to BS 8102. If it isn’t, it is usually a damp-proofing job.

Damp-proof courseGround levelFloorRoom abovethe ground
Floor above the ground outside: damp proofing. A damp-proof course stops moisture rising through the wall.
WaterproofingGround levelFloorRoom belowthe ground
Floor below the ground outside: waterproofing. The wall is holding back soil and water, so it needs a BS 8102 design.

Simplified sections through an outside wall. Not to scale.

Damp proofing: walls above ground level

Damp proofing deals with moisture rising from below or soaking in through masonry that sits above the ground outside.

  • Tide marks and salts low on the wall
  • Peeling paint or crumbling plaster
  • Usually fixed with a damp-proof course and the right plaster or render

Waterproofing: walls and floors below ground level

Waterproofing is for any wall or floor that is below the ground outside, such as basements, cellars, vaults and lower ground floors.

  • Water on the floor after heavy rain
  • Wet patches where walls meet the floor
  • Fixed with a BS 8102 design: a barrier (Type A), a cavity drain (Type C), or both

Why it matters

A damp-proof course won’t hold back water under pressure from the ground, so using damp-proofing methods below ground means the problem comes back. Our surveyors are qualified in both, so they will tell you which you need.

Not sure what you need?A qualified surveyor will find the cause and tell you straight.
Ask a surveyor

Related service: Rising Damp & Damp-Proof Courses